1:39
Plastic Extrusion And Recycling Line Manufacturer
OEM And ODM ·Voltage Configured ·Full Run Test ·Quote In 24h
Plastic Extrusion And Recycling Line Manufacturer
OEM And ODM ·Voltage Configured ·Full Run Test ·Quote In 24h
This video gives a clear look at the Φ20–Φ110mm PE pipe extrusion line in operation, helping customers understand the main machine configuration, production process, pipe forming performance, cooling system, hauling, cutting, and final pipe handling. It...
This video gives a clear look at the Φ20–Φ110mm PE pipe extrusion line in operation, helping customers understand the main machine configuration, production process, pipe forming performance, cooling system, hauling, cutting, and final pipe handling. It is useful for evaluating whether this PE pipe production line fits similar pipe manufacturing requirements.
Process Stages Shown
Materials Covered
Configuration points shown or mentioned in the footage.
| Parameter | Value |
|---|---|
| Pipe Diameter Range | Φ20–Φ110mm Suitable for multiple PE/HDPE pipe sizes |
| Suitable Material | PE / HDPE For water supply, irrigation, and general plastic pipe applications |
| Production Capacity | 150–320kg/h Depends on pipe size, wall thickness, and material formulation |
| Main Extruder | SJ50/38 Single Screw Extruder High-efficiency extrusion for main pipe layer |
| Main Extruder Motor Power | 55kW Permanent magnet motor |
| Co-Extruder | SJ45/33 Single Screw Extruder Used for double-layer/co-extrusion pipe production |
| Co-Extruder Motor Power | 15kW Supports stable co-extrusion |
| Color Line Extruder | SJ25/25 Co-Extruder For color marking line on PE pipe |
| Color Line Extruder Motor Power | 1.5kW Small co-extruder for marking stripe |
| Pipe Mould | Φ20–Φ110mm Three-Layer PE Pipe Mould Supports 20, 25, 32, 40, 50, 63, 75, 90, 110mm |
| Meter Weight Control | Double-Layer Meter Weight Control System Helps improve pipe weight accuracy and reduce material waste |
| Vacuum Calibration Tank | 9m Stainless Steel Vacuum Tank For pipe sizing and initial cooling |
| Spray Cooling Tank | 6m Spray Cooling Tank × 2 For further pipe cooling |
| Haul-Off Machine | Three-Caterpillar Servo Haul-Off Stable traction for Φ20–Φ110mm pipes |
| Haul-Off Speed | 0.1–25m/min Adjustable according to pipe size and production speed |
| Cutting Machine | High-Speed Chipless Cutting Machine Clean cutting without chips |
| Max Cutting Thickness | 8mm Suitable for pipe wall thickness within this range |
| Pipe Stacker | 4m Turnover Type Stacker For final pipe unloading and collection |
| Installed Power | Approx. 150kW Complete line installed power |
| Power Supply | 380V / 50Hz / 3 Phase Can be customized according to local requirements |
| Operation Direction | Right to Left Can be arranged according to workshop layout |
This video introduces a complete Φ20–Φ110mm PE Pipe Extrusion Line supplied by QTech-Machinery for an overseas customer. The line is designed for producing PE pipes in multiple specifications with stable output, accurate pipe weight control, smooth forming and efficient operation.
Through this video, viewers can see the complete PE pipe production process, including automatic feeding, drying, high-efficiency single-screw extrusion, co-extrusion, meter weight control, pipe mould forming, vacuum calibration, spray cooling, servo haul-off, chipless cutting and pipe stacking. The project demonstrates QTech-Machinery’s ability to deliver a customized plastic pipe production solution for different pipe sizes and market applications.
The customer needed a reliable PE pipe production line capable of covering a wide pipe diameter range from Φ20mm to Φ110mm. The line needed to support multiple pipe specifications while maintaining stable output, accurate pipe weight and smooth pipe forming.
Key requirements included:
The customer required the production line to support the following pipe sizes:
| Pipe Diameter | Application Reference |
|---|---|
| 20 mm | Small-diameter water pipe or cable protection pipe |
| 25 mm | Plumbing, irrigation or protection pipe |
| 32 mm | Water delivery and utility pipe |
| 40 mm | Construction and agricultural pipe |
| 50 mm | General PE pipe applications |
| 63 mm | Irrigation and infrastructure pipe |
| 75 mm | Medium-size PE pipe production |
| 90 mm | Municipal and industrial pipe |
| 110 mm | Larger PE pipe for infrastructure applications |
QTech-Machinery provided a complete PE pipe extrusion solution covering the full production workflow. The supplied system includes automatic feeding, drying, extrusion, co-extrusion, meter weight control, mould, vacuum calibration, spray cooling, servo haul-off, chipless cutting and pipe stacking.
This complete configuration helps the customer improve production stability, reduce manual operation and achieve consistent pipe quality across different diameter specifications.
| Machine / Section | Specification | Function |
|---|---|---|
| Automatic Vacuum Loader | QX-800 | Feeds raw material automatically to the main extruder |
| QX-800 Conveying Capacity | 450 kg/h | Supports continuous material supply |
| QX-800 Motor Power | 1.5 kW | Provides stable feeding power |
| Hopper Dryer | QX-75 | Dries raw material before extrusion |
| QX-75 Loading Capacity | 75 kg | Suitable for main material drying |
| QX-75 Heating Power | 7.5 kW | Provides heat for moisture removal |
| Auxiliary Vacuum Loader | QX-300 | Feeds material to the co-extruder |
| QX-300 Conveying Capacity | 300 kg/h | Supports auxiliary material feeding |
| QX-300 Motor Power | 0.75 kW | Provides stable auxiliary feeding |
| Auxiliary Hopper Dryer | QX-50 | Dries auxiliary or marking material |
| QX-50 Loading Capacity | 50 kg | Suitable for co-extrusion material preparation |
| QX-50 Heating Power | 6.5 kW | Provides drying heat |
| Main Extruder | SJ50/38 High-Efficiency Single Screw Extruder | Main plasticizing and extrusion for PE pipe production |
| Main Extrusion Capacity | 150–300 kg/h | Supports stable medium-output pipe production |
| Main Motor Power | 55 kW permanent magnet motor | Provides efficient extrusion power |
| Screw Diameter | 50 mm | Suitable for Φ20–Φ110mm PE pipe production |
| Screw L/D Ratio | 38:1 | Improves plasticizing efficiency and melt uniformity |
| Screw Speed | 0–110 rpm | Adjustable for different pipe sizes and outputs |
| Screw & Barrel Material | 38CrMoALA with nitriding treatment | Improves wear resistance and service life |
| Barrel Heating Zones | 5 zones | Supports precise temperature control |
| Barrel Heating Power | 27 kW | Provides stable heating for PE processing |
| Cooling Method | Air cooling | Maintains proper barrel temperature |
| Gearbox | High-torque gearbox | Supports stable extrusion under load |
| Inverter | ABB inverter | Enables reliable speed control |
| Electrical Components | Schneider contactors, indicators and buttons | Improves electrical reliability and operation safety |
| Co-Extruder | SJ45/33 Single Screw Co-Extruder | Supports marking line or co-extrusion layer |
| Co-Extrusion Capacity | 10–50 kg/h | Suitable for color marking or auxiliary material extrusion |
| Co-Extruder Motor Power | 15 kW | Provides stable co-extrusion power |
| Co-Extruder Screw Diameter | 45 mm | Supports auxiliary extrusion requirements |
| Co-Extruder L/D Ratio | 33:1 | Provides reliable plasticizing |
| Co-Extruder Screw Speed | 0–110 rpm | Adjustable for different co-extrusion needs |
| Co-Extruder Heating Zones | 4 zones | Supports temperature control |
| Co-Extruder Heating Power | 12 kW | Provides stable barrel heating |
| Co-Extruder Cooling | Air cooling | Maintains processing temperature |
| Co-Extruder Gearbox | Guomao gearbox | Supports reliable operation |
| Co-Extruder Inverter | ABB inverter | Provides speed adjustment |
| Downstream System | Meter weight control, mould, vacuum calibration, spray cooling, servo haul-off, chipless cutting and stacking | Completes pipe forming, cooling, cutting and collection |
The video shows the complete production process from raw material feeding and drying to extrusion, sizing, cooling, hauling, cutting and stacking. It helps buyers understand how a full PE pipe line operates in real factory conditions.
The QX-800 and QX-300 vacuum loaders provide automatic material conveying for the main extruder and co-extruder. The QX-75 and QX-50 hopper dryers prepare the raw material before extrusion, helping improve processing stability and final pipe quality.
The SJ50/38 high-efficiency single screw extruder is the core of the production line. With a 55 kW permanent magnet motor, 38:1 L/D ratio and 0–110 rpm screw speed, it is designed for stable PE plasticizing and efficient pipe production.
The SJ45/33 co-extruder supports auxiliary extrusion, such as color marking lines or co-extruded layers. This helps manufacturers improve product identification and meet different market requirements.
The line includes a meter weight control system to help maintain accurate pipe weight per meter. This is important for reducing material waste, stabilizing product quality and controlling production cost.
After extrusion and mould forming, the pipe passes through vacuum calibration and spray cooling systems. These sections help maintain pipe roundness, outer diameter accuracy, surface quality and dimensional stability.
The servo haul-off system pulls the pipe steadily through the production line. The chipless cutting machine provides clean cutting without generating chips, while the stacking system organizes finished pipes for collection and packaging.
This video provides a practical reference for manufacturers planning to produce PE pipes from 20mm to 110mm. It shows the complete configuration needed for multi-size pipe production with stable output and efficient operation.
The line is suitable for producing PE pipes used in agricultural irrigation, municipal engineering, construction and industrial applications. The video helps buyers evaluate machine configuration and production workflow before investment.
Project buyers can use this video to review the line structure, automation level, extrusion capacity, material handling system and downstream equipment before choosing a similar extrusion solution.
| Application | Description |
|---|---|
| Agricultural Irrigation | PE pipes for farmland water delivery and irrigation systems |
| Cable Protection | PE pipes for protecting electrical or communication cables |
| Construction and Infrastructure | Plastic pipes for building and infrastructure projects |
| Municipal Engineering | PE pipes for public utility and municipal systems |
| Industrial Applications | PE pipes for industrial fluid transport or protection |
| Industrial Straw Production | Customized plastic extrusion applications depending on product requirements |
| Water Supply Systems | PE pipes for general water transportation |
| Custom Item | Available Configuration |
|---|---|
| Pipe Diameter Range | Customized according to required pipe sizes |
| Raw Material | PE/HDPE, PP, PPR and related formulations |
| Output Capacity | Extruder model selected according to kg/h target |
| Screw Design | Optimized according to material and product application |
| Co-Extrusion | Optional co-extruder for marking line or multi-layer pipe |
| Meter Weight Control | Available for accurate pipe weight control |
| Pipe Mould | Customized according to pipe diameter and wall thickness |
| Vacuum Calibration | Tank configuration matched to pipe size and speed |
| Spray Cooling | Cooling length and water system customized |
| Haul-Off System | Servo haul-off selected according to pipe size |
| Cutting System | Chipless cutting for clean and efficient pipe cutting |
| Stacking System | Customized according to pipe length and production layout |
| Voltage | Configured according to local power supply |
| Factory Layout | Line direction and machine arrangement customized |
This project demonstrates QTech-Machinery’s capability to provide a complete and customized PE pipe extrusion line for overseas customers. The line integrates automatic feeding, drying, high-efficiency extrusion, co-extrusion, meter weight control, calibration, cooling, haul-off, cutting and stacking into one coordinated production system.
It also reflects QTech-Machinery’s engineering approach: each extrusion line is configured based on the buyer’s raw material, pipe diameter range, target output, local voltage and workshop layout.
This video presents a complete Φ20–Φ110mm PE Pipe Extrusion Line designed for producing multiple PE pipe sizes with stable output, accurate pipe weight control and efficient operation. It highlights the main equipment configuration, technical features and production workflow, helping viewers understand how QTech-Machinery supports global customers with customized plastic pipe extrusion solutions.
For manufacturers planning to produce PE pipes for irrigation, cable protection, municipal engineering, construction or industrial applications, this project video provides a useful reference for selecting the right extrusion line configuration and evaluating a reliable turnkey machinery supplier.
The machine in this video is one configuration. Send your target output, raw material, product size range, and local voltage, and our engineers quote the correct screw, die, downstream, and control setup for your market.
If your question is not covered here, send it over. Maggie replies with drawings, test footage, or a spare parts list within 24 hours.
The video shows a Φ20–Φ110mm PE pipe extrusion line, suitable for producing different PE/HDPE pipe diameters within this range.
The line includes automatic feeding, drying, single screw extruders, three-layer pipe mould, meter weight control system, vacuum calibration tank, spray cooling tanks, servo haul-off, chipless cutter, and pipe stacker.
Yes. It shows the full process from raw material feeding, extrusion, pipe forming, vacuum sizing, spray cooling, hauling, cutting, to final pipe stacking.
The main extruder shown is an SJ50/38 high-efficiency single screw extruder, with additional co-extruders for multi-layer pipe and color marking line.
Yes. The video shows a three-layer PE pipe mould and co-extrusion configuration, which can be used for multi-layer PE pipe production.
Model ranges, output in kg/h, and configuration options on the product pages.
Full specifications, model comparison, and voltage options on the product page.
View Product PageFull specifications, model comparison, and voltage options on the product page.
View Product PageShare your output target in kg/h, product size range in mm, raw material, and destination country. We map every parameter shown here to your project and reply with drawings and a quotation within 24 hours.
More footage from our workshop, machine testing, packing, and installation reference.
Seen a machine that matches what you need, or want a different configuration? Send what you have. Maggie replies personally within 24 hours with real configuration details and a clear next step.
Maggie
Machinery Sales, QTech Machinery
Replies within 24 hoursEvery message here reaches me directly. Tell me what you need to produce and I come back with a line configuration and a real quote, not a brochure.
Your material, product size range, output target, or a drawing is enough to start. We supply extrusion, pulverizing, pelletizing, and material handling lines to factories and importers across 60+ countries.
Maggie
Sales, Zhangjiagang Qinxiang Machinery Co., Ltd.
Fields marked are required.
