Extrusion Line Application Asia-Pacific

PE Core Tube Extrusion Line Project for Electronic Material Packaging

QTech-Machinery supplied a complete PE core tube extrusion production line for a customer engaged in electronic material packaging applications. The customer required a stable and efficient production solution for manufacturing PE roll core pipes / PE...

Chat With Maggie
01 / Background

Project Overview

QTech-Machinery supplied a complete PE core tube extrusion production line for a customer engaged in electronic material packaging applications. The customer required a stable and efficient production solution for manufacturing PE roll core pipes / PE winding core tubes, which are widely used as supporting cores for film, foil, electronic materials, and flexible packaging products.

The project focused on producing PE core tubes with consistent inner diameter, uniform wall thickness, smooth surface quality, and reliable dimensional accuracy. Based on the customer’s production target and pipe specification requirements, QTech-Machinery designed a complete extrusion line including a single screw extruder, pipe mould, vacuum calibration tank, three-claw haul-off machine, and chipless cutting machine.

The production line was designed for medium-output PE core pipe manufacturing with easy operation, stable extrusion pressure, efficient cooling, accurate traction, and clean cutting performance.

PE Core Tube Extrusion Line Project for Electronic Material Packaging

Project Data
Region
Asia-Pacific
Project Type
Extrusion Line Application
Product Category
Plastic Pipe Making Machine
Application
Agricultural Irrigation, Cable Protection, Construction and Infrastructure, Industrial Applications, Natural Gas Distribution
Material
ABS, PE/HDPE
Project Videos
1 on this page
Project Photos
21 on this page
02 / What We Solved

Requirement And Solution

What the customer needed to produce, and the line we configured to get there.

PE Core Tube Extrusion Line Project for Electronic Material Packaging
Requirement

What The Customer Needed

The customer needed a customized PE core pipe extrusion line suitable for continuous production of thick-wall PE tube products used in roll core and winding core applications.

Key project requirements included:
1. Production of PE core tubes with an inner hole around 77 mm
2. Multiple wall thickness options, including 6 mm, 7 mm, 8 mm, 9 mm, and 10 mm
3. Stable extrusion output for PE material processing
4. Smooth pipe surface and uniform pipe roundness
5. Reliable vacuum sizing and cooling performance
6. Strong traction force for thick-wall pipe pulling
7. Accurate length counting and automatic cutting
8. Clean cutting surface without excessive dust or chips
9. Easy operation through PLC and touch screen control
10. Durable mechanical structure suitable for long-term industrial production

The customer also required the whole line to maintain a center height of around 1000 mm, allowing all downstream equipment to be well aligned for stable pipe forming and continuous production.

Solution

What We Supplied

QTech-Machinery provided a complete PE core tube extrusion line configured according to the customer’s pipe size range and production demand. The solution was built around a 75/33 single screw extruder, combined with a specially designed PE pipe mould and downstream equipment for vacuum calibration, traction, measuring, and cutting.

The system was engineered to improve extrusion stability, reduce operational complexity, and ensure consistent pipe dimensions during long production runs. The extruder was equipped with a high-efficiency screw and barrel system, while the downstream line adopted a robust vacuum tank, servo-controlled three-claw haul-off unit, and chipless rotary cutting system.

This turnkey solution helped the customer achieve stable production of PE core tubes with different wall thicknesses while maintaining reliable pipe quality and production efficiency.

Please Note

Every Line Is Configured To The Buyer Market

This project was built to one set of requirements. Send your target output, raw material, product size range, and local voltage, and our engineers quote the correct screw, die, downstream, and control setup for your own factory.

Chat With Maggie
03 / Line Data

Key Configuration

The main machine, material handling, control, and downstream setup delivered on this project. Step through each configuration point.

Plastic extrusion machine for manufacturing plastic pipes and profiles in factory setting Plastic extrusion machine for plastic pipe and profile production in factory scene Plastic extrusion machine for manufacturing plastic pipes and profiles in factory setting Plastic extrusion machine for PE core tube extrusion line haul off in a showroom scene Plastic extrusion machine used for manufacturing plastic pipes and profiles in a factory setting
SJ75/33 Single Screw Extruder
01

SJ75/33 Single Screw Extruder

1. Screw and barrel material: Made of 38CrMoAlA, with quenching, tempering, and nitriding treatment for high wear resistance.
2. Screw diameter: Equipped with a 75 mm screw, suitable for medium-capacity PE pipe extrusion.
3. L/D ratio: Designed with a 33:1 length-to-diameter ratio to improve melting uniformity and extrusion stability.
4. Screw type: High-performance alloy screw design for improved plasticizing effect and longer service life.
5. Main motor power: Equipped with a 45 kW permanent magnet motor for efficient power transmission.
6. Speed control system: Controlled by a 45 kW inverter/controller, allowing stable speed adjustment during production.
7. Barrel heating system: Uses cast aluminum heaters with cooling fans to ensure precise temperature control.
8. Heating zones: Barrel heating power configured as 4.5 kW × 5 zones, supporting segmented temperature regulation.
9. Control system: Equipped with Siemens PLC, Siemens touch screen, pressure sensor, and quality electrical components.
10. Auxiliary feeding system: Includes material drying and loading support, suitable for continuous PE material feeding.

02

PE Core Tube Mould

1. Application: Specially designed for PE core tube / PE roll core pipe extrusion.
2. Inner diameter requirement: Designed for pipe inner hole around 77 mm.
3. Wall thickness range: Supports multiple wall thicknesses including 6 mm, 7 mm, 8 mm, 9 mm, and 10 mm.
4. Mould structure: Optimized flow channel design to improve melt distribution and reduce material dead zones.
5. Material flow stability: Balanced melt flow helps ensure uniform pipe wall thickness.
6. Heating interface: Reserved multi-zone heating connection for precise mould temperature control.
7. Temperature connection: Industrial heating sockets and thermocouple sockets for convenient wiring and maintenance.
8. Pipe forming accuracy: Designed to support stable outer diameter and inner diameter control.
9. Easy adjustment: Mould structure allows practical adjustment during commissioning and size optimization.
10. Production compatibility: Suitable for PE pipe extrusion with thick-wall core tube forming requirements.

03

160 Vacuum Calibration Tank

1. Tank length: Equipped with a 9-meter vacuum calibration section for effective pipe sizing and cooling.
2. Vacuum range: Vacuum degree designed at 0.02–0.08 MPa, adjustable according to pipe forming conditions.
3. Tank material: Made with SUS304 stainless steel, improving corrosion resistance and durability.
4. Tank wall thickness: Uses 3 mm stainless steel plate for strong structural performance.
5. Tank size: Internal tank design around 500 × 500 mm, suitable for the target pipe range.
6. Vacuum pump: Equipped with 5.5 kW vacuum pump for stable vacuum forming performance.
7. Water pump: Configured with high-power cooling water pump to ensure sufficient spray cooling capacity.
8. Forward/backward movement: Driven by 1.5 kW cycloidal reducer motor, with adjustable movement distance up to 800 mm.
9. Position adjustment: Supports vertical and horizontal adjustment, allowing accurate line alignment during commissioning.
10. Cooling and control system: Includes spray cooling groups, automatic water level control, temperature display, and vacuum alarm function.

04

Three-Claw Haul-Off Machine

1. Machine structure: Three-claw traction design for stable and balanced pipe pulling.
2. Total machine length: Overall haul-off frame length around 2800 mm.
3. Effective traction length: Provides approximately 2000 mm effective contact length for stable pulling.
4. Traction speed: Adjustable pulling speed from 0.2 to 3 m/min, suitable for different wall thicknesses.
5. Drive motor: Equipped with 3 × 1.5 kW servo motors for precise traction control.
6. Reducer system: Uses K-series reducer structure for reliable torque output.
7. Maximum traction force: Designed traction force up to around 1200 N.
8. Speed regulation: Servo controller enables smooth speed adjustment and synchronization with extrusion output.
9. Clamping system: Pneumatic pressing adjustment helps maintain stable pipe contact without deformation.
10. Length measuring function: Encoder-based automatic meter counting supports accurate pipe length control and cutting signal output.

05

160 Chipless Cutting Machine

1. Cutting type: Rotary cutting structure with pneumatic blade feeding for smooth cutting action.
2. Application range: Suitable for pipe cutting within approximately 50–160 mm diameter range.
3. Motor power: Equipped with 1.5 kW cutting motor for stable cutting performance.
4. Power supply: Designed for 380 V / 50 Hz industrial power supply.
5. Cutting thickness capacity: Maximum cutting wall thickness up to about 20 mm.
6. Clamping method: Aluminum follow-up clamping device helps hold the pipe firmly during cutting.
7. Cutting travel: Cutting movement stroke around 700 mm, suitable for continuous production operation.
8. Control system: Equipped with PLC and touch screen operation for easy parameter setting.
9. Blade specification: Uses small-diameter precision cutting blade for clean pipe end surface.
10. Speed adjustment: Rotary speed controlled by inverter, allowing optimized cutting performance for different pipe sizes.

1 / 5
Chat With Maggie
04 / From The Floor

Project Photos

Assembly, run testing, control cabinet, packing, and installation shots taken during this project. Tap any photo to enlarge.

Outcome

Project Result

After installation and commissioning, the PE core tube extrusion line achieved stable production performance and met the customer’s requirements for pipe dimension, wall thickness, and surface quality.

The production line delivered several practical benefits:
1. Stable extrusion output for PE core tube manufacturing
2. Consistent pipe inner diameter and wall thickness control
3. Smooth pipe surface with reliable roundness
4. Efficient vacuum sizing and cooling performance
5. Servo-controlled traction for stable pipe pulling
6. Accurate meter counting and automatic cutting
7. Clean pipe ends with reduced cutting dust
8. Easy operation through touch screen and PLC control
9. Strong mechanical structure suitable for long-term operation
10. Flexible production for multiple PE core tube thickness specifications
With this project, QTech-Machinery helped the customer build a reliable PE core pipe extrusion production line for electronic material roll core applications. The customized configuration improved production continuity, reduced manual operation difficulty, and provided a dependable solution for high-quality PE winding core tube manufacturing.

Match This Project

Want The Same Result In Your Own Factory?

Share your output target in kg/h, product size range in mm, raw material, and destination country. We map this configuration to your project and reply with a line layout, drawings, and a quotation within 24 hours.

Chat With Maggie
05 / Machines Used

Equipment On This Project

Model ranges, output in kg/h, and configuration options on the product pages.

Plastic Extrusion Machine

Full specifications, model comparison, and voltage options on the product page.

View Product Page

Plastic Pipe Extrusion Line

Full specifications, model comparison, and voltage options on the product page.

View Product Page
06 / More Projects

Related Cases

Similar lines we configured, tested, and shipped for other factories.

07 / Configuration Request

Build A Line Like This With Maggie

This project started with one message about output and material. Send yours and Maggie replies personally within 24 hours with a line configuration and a real quote, not a brochure.

Maggie, machinery sales contact at QTech Machinery

Maggie

Machinery Sales, QTech Machinery

Replies within 24 hours

Every message here reaches me directly. Tell me what you need to produce and I come back with a line configuration and a real quote, based on projects like the one you just read.

Your material, product size range, output target, or a drawing is enough to start. We supply extrusion, pulverizing, pelletizing, and material handling lines to factories and importers across 60+ countries.

Maggie

Sales, Zhangjiagang Qinxiang Machinery Co., Ltd.

Configuration Request

Tell Us About Your Project

Fields marked are required.

Details stay private No sales spam Maggie replies in person